KARL FISCHER TITRATION
Karl Fischer Titrator is used for Accurate Moisture Estimation in various samples. The Karl Fischer method is used for many substances as a reference method. It is a chemical analysis procedure which is based on the oxidation of sulfur dioxide by iodine in alcoholic solution. The titration can be performed Volumetrically or Coulometrically.
Volumetric Titrator
Volumetric Titrator is used for higher water contents such as 100 PPM and above using appropriate sample quantity. For higher water contents, less sample quantity is necessary and proportionately higher sample quantity is required for low water contents.
Application: Volumetric Titrator
-
Pharmaceutical and Chemical Industry
-
Petrochemical Industry
-
Petroleum products like furnace oil, L.D.O. etc
-
Lubricating and Hydraulic Oil Users and Manufacturers
-
Distilleries and Alcohol Users and Manufacturers
-
Food and Beverage Industry
-
Polymer, Paint and Plastic Industry
-
Textile Auxiliaries and Cosmetic Industry
-
Fine Chemicals
Veego/Matic-EX
DIGITAL AUTOMATIC KARL FISCHER TITRATION APPARATUS
Specifications:
-
Incorporated with maintenance free Dispenser.
-
No Refilling is necessary after every titration.
-
Several titrations can be carried out uninterruptedly.
-
Average factor calculation facility.
-
Results are Automatically Calculated in Percentage, PPM and mg of H2O.
-
Memory storage for 100 test method.
-
Inbuilt volume validation facility.
-
Equipped with inbuilt volume validation facility.
-
RS 232 Interfaces for PC and Balance Interface.
Veego/Matic-MD
DIGITAL AUTOMATIC KARL FISCHER TITRATION APPARATUS
Specifications:
-
Easy to operate advanced Volumetric Titrator.
-
Valve-less Dispenser eliminates the need of cumbersome piston burette.
-
No Refilling is necessary after every titration.
-
Several titrations can be carried out uninterruptedly.
-
Supports Water method for factor determination.
-
Average factor calculation facility.
-
Results are Automatically Calculated in Percentage, PPM and mg of H2O.
-
Inbuilt volume validation facility.
Veego/Matic-D
DIGITAL AUTOMATIC KARL FISCHER TITRATION APPARATUS
Specifications:
-
Easy to operate advanced Volumetric Titrator.
-
Incorporated with peristaltic pump.
-
Valve-less Dispenser eliminates the need of cumbersome piston burette.
-
No Refilling is necessary after every titration.
-
Several titrations can be carried out uninterruptedly.
-
Wide Range of Moisture Detection; 100 PPM to 100% with appropriate sample quantity.
-
Audio Signal to indicate the end point of the Titration.
-
Inbuilt volume validation facility.
-
Manual Calculations for Factor and Results.
Coulometric Titrator
The Coulometric Titrator is used for trace analysis of water content. This model is recommended for Transformer/Insulating Oils containing water less than 100 PPM.
Application: Coulumetric Titrator
-
Transformer / Insulating Oil users and manufacturers.
-
Transformer manufacturers.
-
Capacitor / PXE oil users and manufacturers.
-
Lubricating / Hydraulic oil users and manufacturers.
-
Power plants.
-
Railways.
-
Estimation of moisture from Aviation Fuel.
-
Oil filtration plant manufacturers and service providers.
Veego/Matic-III
DIGITAL AUTOMATIC KARL FISCHER TITRATION APPARATUS
Specifications:
-
Water Contents is estimated by measuring amount of electrolysis current to produce required Iodine. This is an absolute technique that does not require Calibration of Reagent.
-
Automatic Drift Compensation.
-
Range: 1 PPM to 100 % with appropriate sample quantity.
-
Resolution: 0.001 mg.
-
Results are Automatically Calculated in Percentage, PPM and mg of H2O.
-
User friendly Alphanumeric LCD Display.
-
Audio Signal to indicate the End Point of the Titration.
-
Error Messages informs problem about Electrode.
OTHER SET OF INSTRUMENTS
Potentiometric Titrator
Leak Test Apparatus
Electronic Micropipette
USP Type 1 Vials
BET Test Kit
Melting Point Apparatus
